Boards, mechanism, and assembly details.
Prototype hardware release. Five routed PCBs now include the original RODDY logo, readable assembly silkscreen and pin markings. The R5 drive and R4 external case include the selected springs, retained metal followers, switch mounts, inserts and wiring routes. Physical sample qualification remains necessary; firmware is unchanged.
Hardware fixes included
- Sliding contacts: high-side media power cutoff, active discharge, passive bleed and a separately biased buffer-enable circuit. Both firmware permission and the physical seat/eject loop are required. A broken interlock wire disables the medium.
- Mechanical sequencing: the short right-side button opens the flap before withdrawing the latch. Standard metal follower screws run in replaceable brass sleeves. Catalog springs, real insert depths, retained pivots and switch-wire paths are modeled.
- Electrical assembly: through-hole core/dock carriers with socketed Pico 2 H modules, board-mounted external ports, current-limited piezo output, and three through-hole addressable LEDs in a removable holder.
- Inspection: solder mask covers traces and fills in the preview; exposed pads and leaves remain metallic. All five PCB views include their actual silkscreen. The saved schematic and PCB files, not the rendered colors, define the electronics.
Saved-file verification
| Board | Connected pins checked | ERC violations | DRC geometry errors | Unrouted items | Reports |
|---|---|---|---|---|---|
| Single disk · R4 | 22 | 0 | 0 | 0 | ERC · DRC |
| A/B disk · R4 | 44 | 0 | 0 | 0 | ERC · DRC |
| Contact board · R1 | 14 | 0 | 0 | 0 | ERC · DRC |
| Main controller · R1 | 271 | 0 | 0 | 0 | ERC · DRC |
| External daughterboard · R3 | 254 | 0 | 0 | 0 | ERC · DRC |
Previous experimental firmware — unchanged
Implemented, not hardware-proven: the core generates 720 KiB / 1.44 MiB PC MFM read pulses using PIO/DMA and always asserts write protection. The dock implements USB MSC/SCSI removable read/write storage over the journal. USB MSC is not a USB UFI floppy profile. These binaries require controller R1 and dock R3.
Host test results · Address/undefined-behavior sanitizer results · Build provenance and checksums
What a real sample still has to establish
The remaining hardware work is physical qualification: print fit, spring friction and handedness, contact wear, switch adjustment, fastest eject, brownout discharge, supply margins, USB and actual host behavior. Digital checks cannot measure these. Start with a prototype, not a production batch.
PC write capture, IEC drive/DOS behavior and complete emulation profiles remain software work. ESP32 and Spectrum Next use separate host adapters; the accessory connector alone does not make this a native Next floppy interface.
Compatibility targets
| Connection | Required behavior |
|---|---|
| PC 34-pin FDD | Compiled read-only 720 KiB/1.44 MiB MFM prototype. Write capture/format unfinished; timing, boot and host operation untested. Not universal Shugart wiring. |
| C64 / X16 / selected Ultimate · IEC | Selected Commodore drive profile, DOS commands and disk images. Fast loaders and full drive timing need separate implementation and tests. |
| Windows / Linux · USB-B | Compiled USB MSC/SCSI read/write prototype. USB UFI floppy profile remains unfinished. OS binding, removable-media behavior and boot support must be demonstrated. |
| Next / ESP32 · accessory SPI | Active Next adapter or selected ESP32 board and library. The connector alone is not native floppy support. |
| RS-232 | Explicit host software and block/image protocol; a serial connection alone does not create a floppy device. |
The review includes manufacturer datasheet references, pin checks, limits and the engineering sequence required before ordering.
Drive audio R1
The main controller now has a through-hole LM386 amplifier, filtered GP27 PWM input and J6 for a replaceable 20 mm speaker. Sound firmware and powered audio tests are still required.
Circuit, mounting and firmware notes