/ CYBER DISK
BUILD / REPAIR / SOURCE

Every part.
One place.

Electronics, hardware and printed parts for the Cyber Disk prototype. Grouped by where to get them.

Download complete BOM ↓Loading sourcing notes…
Working prototype inventory

“Listed in stock” means a supplier listing was found, not that the part is fit-tested or stock is reserved. Fit pending parts need a dimension check. Unselected entries are optional accessories or assembly consumables. Controller R1 and dock R3 are routed; the interlock mounts and wiring are included in the R5 CAD. Printed and powered sample validation remains open. The full drive is not ready to order as a kit.

Loading parts…

External dock adds to one drive build · pack sizes are in the notes

What you still buy

Besides springs and pins: screws, brass inserts and nuts, wear sleeves, wire and connectors, a cable-grip pad, labels, and the electronics. PCBWay can quote sourcing and assembly for the boards; a bare-board order does not include those components.

Current disk shells snap together. The drive uses serviceable metal fasteners. Spring force, actual hardware fit, contact wear and safe-insertion circuitry still need qualification.

PCBWay assembly service ↗